Microphone drawing in 3 versions will be described in this article! The microphone is a small device that converts acoustic waves into an electrical signal. As a result, there is a significant amplification of sound. To figure out how to draw a microphone, you need to determine the type of model you need.
They come in studio and custom, small for listening and large. The device has a different appearance because it is protected by a metal ball or foam nozzle, although there may be a long narrow part with fibers.
So let’s get started drawing the microphone right away!
Microphone Drawing Easy (option 1)
Above is a round ball, and under them is an elongated handle. At the bottom, we draw the handle’s attachment to the cord in the form of a narrow rectangle (horizontal), to the center of which a small rectangle (vertical) is attached, and the line comes out of it.
Draw a grid of intersecting lines on the ball. It should fill the shape.
Slightly below the middle of the ball, we let a horizontal rim along the ball’s surface. Draw another boundary under the ball on the handle.
Let’s color the drawing. The mesh on the ball will be black, and the product under it will be gray with a glare at the top. The bezel will be steel-colored. We make the handle gray but so that it is lighter than the ball. The cord is black. The glare falls along with the microphone on the left side of the product. We draw out a shadow that draws almost half of the microphone on the surface with darkness to the right.
It is considered an analog of a radio device that does not pull a long cord. This does not restrict the presenter or singer’s movements, allowing him to even dance during the performance. But they have their drawback – they are quickly discharged, as they transmit a signal over the radio. Studio versions can be shaped like a flat pancake, which improves the range of sounds they hear.
Vintage microphone drawing (option 2)
Let’s consider another type of microphones. It is massive, has a different shape. To find out exactly how to draw a microphone, sketch it step by step. Draw a vertical, rounded rectangle so that it is slightly angled. Behind him should be seen at some distance another one of the same. To create volume from below and almost to the top, draw horizontal lines. On the left side, in the middle, we make a vertical line. In the upper part, we sketch an empty area. From the bottom, we release its mount, which goes into the rack.
With a darker pencil or pen, we limit the product, and in the middle, we draw three rows of horizontal stripes, four in each. We draw up four vertical lines on top, draw the same number below.
We shade all the stripes. And the microphone itself is divided by lines on the left and right. We direct the border of the mount and the rack, carefully drawing out all the details. Immediately under the microphone, we apply a shadow in the form of extensive shading. This product can be seen in old films when large American stars sing on stage.
Drawing of microphone old school (option 3)
So how to draw a microphone with a pencil? Let’s start with the boundaries of the device itself. On the left side of the sheet, draw a ball that crosses the round rim on the right. Next is the microphone handle, which tapers slightly towards the end. It looks like a long rectangle.
The product’s ball will be in the form of a metal mesh, so draw parallel vertical and horizontal lines on it. We put the middle of the handle on the stand holder. At the end of it, we draw another nozzle, and from it, we release the cords.
Now you need to draw the rack under its mount. Under the center of the handle we make an uneven rectangle, at the bottom of which we draw a circle with a center. We release the rack from the rectangle down.
It remains to select everything in bold black. An ordinary microphone with a stand and a cord, with a metal attachment, ready to use. It can be found almost everywhere because it is used when holding any holiday, even in schools and kindergartens.